Ltl Acorn 6210 MC and Bushnell 119467 - Review - Part 2

Back to Part 1 - Introduction, Packaging and Spec's

fig 1  Left: Acorn 6210  -  Right: Bushnell 119467

First impressions: Having been conditioned to the Peli case style box of many trail cameras, I initially thought the Ltl Acorn 5210 was a bit quirky; but having used them for a while, I found the design quite practical.


The first incarnation of the 6210 was basically the upgrades in the 5210 box. Then for reasons unknown, the manufacturers did a complete redesign of the whole package whilst keeping the front design almost unchanged but with a slight increase in width and depth.

Fig 2  Ltl Acorn 6210MC

It's likely that the need to accommodate the extra set of four batteries, coupled with a desire to move away from the detachable back sponsored the changes. Whatever the reasons, I couldn't help but be impressed with the ingenuity with which the designers put so much into such a small unit and kept the weight down as well.

From a user point of view, the smaller and lighter the better, and I also felt that, with its bottom opening door the Ltl Acorn 6210 was going to be a lot more weather proof than its predecessor; and all the other front opening trail cameras such as the Bushnell.

Fig 3
Water ingress of the
Ltl Acorn 6210 LED array

I then received the news that one of these cameras had water inside the LED array (Fig 3) after only a few days outdoors; which is a serious issue and not something I wanted to hear at this stage

It could most likely be an ineffective seal where the array mates to the inside of the case front; but